HP LaserJet M5025/M5035 MFP - Software Technical Reference (external)

4. Click Add to open the add device screen.
Figure 6-24 Add printer screen
5. Choose the network connection protocol in the top drop-down menu. The two supported protocols
are Rendezvous and IP Printing.
If you are using Rendezvous, carry out the following step:
NOTE Rendezvous is the easiest method and is the best method to use if the device is
installed on your local network.
IP Printing must be used if you are installing the device on a different network.
If you are using Rendezvous, carry out the following step:
Select the HP LaserJet M5025/M5035 MFP in the Name list. The Printer Model and Model
Name are selected automatically.
NOTE If you are on a network that has more than one HP LaserJet M5025/M5035 MFP,
print a configuration page and match the Rendezvous Printer Name to the name on the list
to identify the device you are installing. (See
Print the configuration page .)
NOTE If the HP LaserJet M5025/M5035 MFP does not appear in the list, verify that the
device is powered on and connected to the network. If it still does not appear, try turning the
device off and then on again. Finally, turn the computer off and then on again, then restart
the setup process. For more troubleshooting information, see
Troubleshooting the printer
setup.
226 Chapter 6 Macintosh ENWW
Macintosh