HP LaserJet M5035x/M5035xs MFP - (multiple language) Getting Started Guide

English

To install a USB connection, go to step 24. Windows with a direct connection (USB). 24) Install the software from

the CD before connecting the cable to the device. Note: If the New

Hardware Found message appears, insert the CD. Follow the onscreen

instructions, accept the default selections, and then go to step 35 on

page 11.

25) On the welcome screen, click Install Printer. The Setup Wizard

appears. Note: If the welcome screen does not appear, click Start, and

then click Run. Type X:SETUP (replace X with CD-ROM drive letter), and

click OK.

26) Follow the onscreen instructions. When prompted, connect a USB

cable between the device and the computer. Note: HP does not

recommend using USB hubs. Use a USB cable that is no longer than

2 meters (6.5 feet).