HP LaserJet M5035x/M5035xs MFP - (multiple language) Getting Started Guide

Macintosh

27) Click Finish. If prompted, restart the computer. Go to step 35 on

page 11.

Connect to a Macintosh computer. 28) Place the CD in the CD-ROM

drive and run the installer. Complete an easy install. Note: Install the

software before connecting the USB cable.

29) Connect a USB cable between the device and the computer. Note: HP

does not recommend using USB hubs. Use a USB cable that is no longer

than 2 meters (6.5 feet).

Important: Perform steps 30-34 only if the USB cable was connected

before the software was installed. Otherwise, go to step 35 on page 11.

30) From Apple System Preferences (available in the Apple drop-down

menu) click Print & Fax, and then click the Printing tab at the top of the

window. 31) To add your device, click the “+” icon to launch the Printer

Browser. By default, the Printer Browser displays devices that are

connected through USB, Bonjour, and AppleTalk networking.