HP LaserJet M5025 and M5035 MFP Product Series - Solutions provided by the 48.031.7 firmware roll

Page 3 of 5
PRINT JOB The time values available for this feature will be presented under the "HOLD
OFF TIME" menu item which will becomes available after turning this feature on.
¾ A 49.4c02 error may be seen on the HP Easy Select control panel when printing documents
with certain Franklin Gothic Book True Type Fonts.
¾ When selecting Manual Feed for copy paper source in German, the display is not localized.
¾ A 49.00FF error may occur when printing certain PDF's.
¾ When devices Embedded Web Server is viewed in the Japanese language, the Event Log
Page displays garbage characters in the "Description and Personality" field
¾ The short cut numerical steps provided on the Printed Menu Map are not accurate
¾ MFP will roll to a different NTP server when configured by hostname if named server is not
available
¾ Intermediate and Maximum control panel lock settings do not lock tray settings. With this
release, the Modify button is grayed out with these CP Lock settings
¾ The text for the HP Easy Select control panel Copy selection for the 2 sided to 2 sided copy
selection is not localized correctly in German
¾ When the HP Easy Select Control Panel is set to Japanese the date and time are not
presented correctly
¾ The Book Copy screen and Skip page description that are found on the HP Easy Select
control panel are not localized correctly for most languages
¾ A 49.4c01 error may be seen almost daily on the HP Easy Select control panel when using
the Scheduled Fax Printing feature.
¾ The Time Zones names are not displaying in the dropdown of the Advanced Date and Time
page in the devices Embedded Web Server
¾ Some duplexed documents may output incorrectly when the print job sources paper from
more than one tray on the device
¾ The devices Embedded Web Server's Security page is not localized correctly for UTF-8
languages
¾ A 49.FF09 may be seen on the HP Easy Select control panel when updating the devices
firmware when devices language is set to one of the following languages (Japanese,
Chinese, Korean)
¾ Auto Settings Reset time is based on Inactivity Timeout rather than Auto Settings Reset timer
¾ Event log may show values above 59 seconds instead of rolling to minutes
¾ A 49.5001 error may be presented on the HP Easy Select control panel.
¾ Device Status (i.e.. "Sleep mode on") does not display in Chinese, Japanese or Korean.
¾ If a print job is sent to the device while a copy job is printing, the print job may not print for a
long period of time after the copy job has completed. Note: The ability to control the "Hold
Off Print Job" feature has been added back into the device with this release and this feature
will also intentionally delay print jobs
¾ Configuration page indicates Control Panel Lock set to Intermediate instead of Maximum