HP LaserJet MFP - Imaging and Printing Security Best Practices

Chapter 6: Default Settings:
This chapter lists the default setting for each configuration in the checklist:
Setting
Default Setting
Configure HP Secure Hard Disk
Installed and Enabled
Configure SNMPv3 (Security page).
Not configured
I/O Timeout to End Print Job
Not configured
Configure Job Hold Timeout.
Never Delete
Enable Job Retention.
Enabled
Configure Enable Features options (do not disable
EWS Config at this point).
(See below)
Disable Telnet Config.
Enabled
Disable SLP Config.
Enabled
Disable FTP Printing.
Enabled
Disable LPD Printing.
Enabled
Enable 9100 Printing.
Enabled
Disable IPP Printing.
Enabled
Disable MDNS Config.
Enabled
Disable IPV Multicast Config.
Enabled
Disable WS-Discovery.
?
Enable Encrypt all Web Communication.
Enabled
Configure Encryption Strength to High.
Low
Error Handling
Dump then Reboot
Chapter 6 HP LaserJet and Color LaserJet MFP Security Checklist 71