HP LaserJet MFP M3027, M3035, M4345, M5025, M5035 - Embedded Web Server (EWS) User Guide

Send to E-mail
The product requires a Simple Mail Transfer Protocol (SMTP) gateway server to forward e-mail
messages to a destination. If the SMTP gateway is not responding or has not been configured, the
following message appears on the screen:
0.0.0.0 is not responding or is not a valid SMTP Gateway Server.
Use the E-mail Settings screen to configure SMTP settings, set the maximum e-mail attachment size,
and set the default e-mail address for the product. You can also set a default subject for all e-mail
messages that the product sends. The following illustration and table describe how to use this screen.
Figure 4-2 E-mail Settings screen
Table 4-2 E-mail Settings
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server.
2 Help Click to open a help file that contains information about the screens on the
Digital Sending tab.
ENWW Send to E-mail 55