User Guide

11. Close the ink cartridge door.
Cause: There was a problem with the printhead.
If this did not solve the issue, try the next solution.
Solution 2: Contact HP support
Solution: Contact HP support for service.
Go to:
www.hp.com/support.
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: There was a problem with the printhead.
Printer preparation needed
Solution: Remove the CD/DVD holder from the CD/DVD tray, and then close the
tray. Printing can resume after the preparation is finished.
Cause: The CD/DVD holder was installed in the CD/DVD tray while the product was
performing printer maintenance.
Problem with printer preparation
Solution: Check the print quality of the current print job. If it is not satisfactory, it
could mean the internal clock failed and the product was not able to service the
printhead as scheduled. Try cleaning the printhead to see if that improves the quality.
For more information, see:
“
Clean the printhead” on page 105
Cause: The product was turned off improperly.
Chapter 14
266 Troubleshooting
Troubleshooting