Maintenance & Service Guide HP Elite 7300 and 7500 Microtower, HP Pro 3300 and 3305 Microtower and HP Pro 3300 Small Form Factor

5. Disconnect the power switch cable from the front USB assembly cable.
6. From the outside, front of the computer, press the tab on the right side of the power switch (1) to
disengage it from the chassis.
7. Rotate the power switch right to left (2), and then remove it from the computer (3) while routing
the cable through the hole in the front of the chassis.
To install the power switch, reverse the removal procedure.
128 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis