Maintenance & Service Guide HP Elite 7300 and 7500 Microtower, HP Pro 3300 and 3305 Microtower and HP Pro 3300 Small Form Factor

9. Slide the hard drive out of the cage.
To install a hard drive, reverse the removal procedures.
When installing a hard drive, align the screw holes on the hard disk drive with the screw holes on the
cage.
When installing a hard drive cage, set the hard drive cage down into the bay, aligning the tabs on the
bottom of the cage with the tabs on the chassis.
82 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis