Maintenance & Service Guide HP Elite 7300 and 7500 Microtower, HP Pro 3300 and 3305 Microtower and HP Pro 3300 Small Form Factor

Front I/O and USB Panel Housing Assembly
Description Spare part number
Front I/O and USB assembly for use on 3300/3305 models 657110-001
Front I/O and USB assembly for use on 7500/7300 models 657113-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 50).
2. Remove the access panel (
Access Panel on page 51)
3. Lay the computer on its side with the front facing toward you.
4. Remove the front bezel (
Front Bezel on page 53).
5. Unplug the three cables that connect the assembly to the system board. The assembly cables
connect to the following system board connectors:
●
F_AUDIO – yellow connector
●
F_USB1 – white connector (blue cable)
●
F_USB2 – white connector (black cable)
84 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis