Administrator's Guide

12 Using the Wizard Setup
Select to configure the system time manually or have it automatically configured by an NTP
server. You can also enable support for daylight savings time, if required for your location
This page includes the following settings:
Set system time
• NTP: Enables the router to use NTP to synchronize the system clock to global Internet time,
or allows the time to be set manually.
• Current System Time: Displays the current time setting of the router.
• Time Server Address: The IP address or name of an NTP server.
• Set Time Zone: The local time zone where the router is installed.
Daylight saving
• Enable: Enables daylight saving for the system time. The router automatically sets daylight
saving start and end dates based on the time zone selected.
• Manually Set Time For Daylight Savings: Sets the dates for starting and ending the
daylight saving.
Step 2: Specify WAN settings
The Internet Connection page allows you to set up the router for the type of Internet connection
you have. Before setting up your connection type, have your account information from your ISP
ready.