Administrator's Guide

6 Wireless configuration
The wireless settings section displays configuration settings for the access point functionality of
the router. The sections include configuration options for radio signal characteristics, wireless
security features, Wireless Distribution System (WDS), Wi-Fi Protected Setup (WPS), Wi-Fi
Multimedia (WMM), and MAC authentication.
The R110 router supports a dual-band single radio for 2.4 GHz and 5 GHz operation. The
R120 router suppports two radios, one for 2.4 GHz and one for 5 GHz. This means that the
R110 can operate at 2.4 GHz or 5 GHz, but not both at the same time. The R120 can operate
concurrently at 2.4 GHz and 5 GHz.
Therefore, the wireless settings differ for the R110 and R120 routers. The R110 router has a
single configuration page for 2.4 GHz or 5 GHz operation. The R120 router includes separate
configuration pages for 2.4 GHz and 5 GHz operation.
Note The router supports a maximum of 64 wireless clients per radio.
Viewing wireless interface status
The Status page displays the current status of radio settings, including operating frequency,
mode, and channel, as well as specific SSID settings.
Note The web interface examples in this chapter show the R110, the web pages for the R120 are
slightly different.