Getting Started

18 www.hp.com Getting Started
Getting Started
System does not
power on and the
LEDs on the front of
the computer are not
flashing.
System unable to
power on.
Press and hold the power button
for less than 4 seconds. If the
hard drive LED turns green,
then:
1. Check that the voltage
selector, located on the
rear of the power supply
on some models, is set to
the appropriate voltage.
Proper voltage setting
depends on your region.
2. Remove the expansion
cards one at a time until the
5 V_aux light on the system
board turns on.
3. Replace the system board.
Solving General Problems (Continued)
Problem Cause Solution