Creative Sound Blaster X-Fi - Quick Start Guide

4. Rotate the support arm down and compress the spring of the arm until it snaps into place.
Installing the HP xw6 Series Support Arm
To install the support are for xw6 series workstations:
1. Insert the arm by engaging the hooks in the openings along the edge of the rear of the chassis.
2. Lower the arm over the card.
© 2005 Hewlett-Packard Development Company, L.P. The HP
Invent logo is a registered trademark of Hewlett-Packard
Development Company, L.P.
410708-001