HP xw Workstations - Optical Drive Installation

5. Install two M3 black guide screws into each side of the drive.

NOTE: Some workstations, such as the xw6200 and xw8200, do not require these guide screws.

6. Slide the optical drive completely into a drive bay so that the drive is secured. On some workstation

models, you will need to lift the spring-loaded latch on the left side of the optical drive cage while

sliding the new drive in.

CAUTION: Ensure that the optical drive has been properly secured. Failure to do so may cause damage

to the drive when moving the workstation.

NOTE: Refer to the documentation included with your workstation for specific instructions on securing an

optional drive.