Software RAID in Linux Workstations

Figure 6. Creating a RAID Device

12. Choose a mount point, file system type, device, and RAID level for this partition.

Figure 7. Creating a RAID Device

13. Click OK.

14. Continue with setup as normal.

The Red Hat Enterprise Linux Anaconda installer only supports RAID-0, RAID-1, and RAID-5. Other

levels or nested RAID must be configured manually after installation. If you are creating a nested RAID

array, you can either configure the “bottom” RAID level (for example, the RAID-1 array in the case of

nested RAID-10) in Anaconda and the “top” RAID level manually later, or configure both parts of the

nested RAID level manually after installation.