Multimedia

1–4 Multimedia
Multimedia hardware
Removing an optical disc (without power)
If external or battery power is not available:
1. Insert the end of a paper clip 1 into the release access in
the front bezel of the drive.
2. Press gently until the tray is released, and then pull out the
tray 2.
3. Remove the disc 3 from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disk by the edges and avoid touching the flat surfaces.
✎
If the tray is not fully accessible, tilt the disc carefully as you
remove it.
4. Close the media tray and place the disc in a protective case.