Power Management - Windows Vista

Inserting or removing the battery
CAUTION Removing a battery that is the sole power source can cause loss of information. To
prevent loss of information, initiate Hibernation or shut down the computer through Windows
before removing the battery.
To insert the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery pack (1) into the battery bay until it is seated.
The battery release latches (2) automatically lock the battery into place.
To remove the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the right-hand battery pack release latch (1) to the right.
3. Slide and hold the left-hand battery pack release latch (2) to the right.
ENWW Inserting or removing the battery 9