Computer Setup

Security menu
Select To Do This
Setup password Enter, change, or delete a setup password.
Power-On password Enter, change, or delete a power-on password.
Password options
●
Enable/disable stringent security.
●
Enable/disable password requirement on
computer restart.
DriveLock passwords
●
Enable/disable DriveLock on any computer hard
drive and optional MultiBay hard drives.
●
Change a DriveLock user or master password.
NOTE DriveLock settings are accessible
only when you enter Computer Setup by
turning on (not restarting) the computer.
Smart Card security Enable/disable support for smart card and Java™
Card power-on authentication.
NOTE Power-on authentication for smart
cards is supported only on computers with
optional smart card readers.
NOTE You must have an administrator
password to change this setting.
TPM Card Security Enable/disable support for TPM (Trusted Platform
Module) Embedded Security, which protects the
computer from unauthorized access to owner
functions in Embedded Security for ProtectTools. For
more information, refer to the ProtectTools Security
Manager Reference Guide located in the Help and
Support Center, or refer to Credential Manager for
ProtectTools online Help.
NOTE You must have an administrator
password to change this setting.
System IDs Enter user-defined computer asset and ownership
tag.
6 Chapter 3 Computer Setup menus ENWW