External Devices

USB legacy support
USB legacy support (enabled by default) allows you to
●
Use a USB keyboard, mouse, or hub connected to a USB port on the computer during startup or
in a non-Microsoft® Windows® application or utility.
●
Start or restart from an optional external MultiBay.
To enable or disable USB legacy support:
1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the
“f10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select System Configuration > Device Configurations..
3. Use the arrow keys to enable or disable USB legacy support.
4. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
changes and exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
ENWW USB legacy support 3