Manualshelf

Hardware Reference Manual

ManualsBrandsHP ManualsPoint of Sale SystemsHP RP3 Retail System Model 3100 Base Model
31323334353637383940
7. Press outward on the release latch located on the front panel just above the cable connection on
the hard drive (1), then slide the carrier toward the center of the chassis and pull the carrier
straight back from the front panel to remove it (2).
Figure 2-28 Removing the Hard Drive Carrier
8. Press the retention arm on the rear of the carrier outward (1), then slide the drive forward and lift
it out of the carrier (2).
Figure 2-29 Removing the Hard Drive from the Carrier
26 Chapter 2 Hardware Upgrades