Manualshelf

Quick Reference Guide

ManualsBrandsHP ManualsPoint of Sale SystemsHP rp3000 Base Model Point of Sale System
12345678910
1 Setting Up the Scanner
Follow the steps below to set up the scanner.
1. Connect the interface cable to the bottom of the scanner.
Figure 1-1 Connecting/Disconnecting the Cable
2. Connect the other end of the interface cable to a USB connector on the host device.
Figure 1-2 USB Interface Connection
3. Aim the scanner at the barcode and press the trigger.
Figure 1-3 Aiming and Scanning
ENWW 1