Technical data

nPartition System Overviews
fruled Command
HP System Partitions Guide: Administration for nPartitions, rev 5.1 102
fruled Command
The /usr/sbin/fruled command blinks hardware attention indicators
(LEDs) or turns them off.
This command can control the cell attention LEDs in all HP nPartition
servers, as well as the I/O chassis LEDs on Superdome servers. The
fruled command also can start and stop blinking the cabinet number
LCDs on HP Superdome compute cabinets and I/O expansion cabinets.
See the fruled (1) manpage for details. Also refer to the section Turning
Attention Indicators (LEDs) On and Off on page 325 for procedures and
examples.
Synopsis fruled [-f|-o] [-B] -c cell [-c...]
fruled [-f|-o] [-B] -i IOchassis [-i...]
fruled [-f|-o] -b cabinet [-b...]
fruled [-f] -C [-l cabinet ] [-l...]
fruled [-f] -I [-l cabinet ] [-l...]
Options -f Turn off specified attention LED(s). This is the default.
The -f and -o options are mutually exclusive.
-o Start blinking the specified attention LED(s). The -o
option is unavailable with -C or -I.
-B Start or stop blinking the cabinet number LCD of the
cabinet that contains the cell or I/O chassis.
The -B option is only available with -c and -i.
-c cell
Blink or turn off the specified cell attention LED.
cell can be specified either in the local
( cabinet/slot ) or global ( cell_ID ) format.
-i IOchassis
Blink or turn off the specified IOchassis attention
LED.
-b cabinet