Technical data

Using Console and Service Processor Interfaces
Network Configuration for a Service Processor
HP System Partitions Guide: Administration for nPartitions, rev 5.1 147
Default Service Processor Network Settings
Table 3-5 and Table 3-6 list the default customer LAN and private LAN
network settings for nPartition servers. Only Superdome servers have a
private LAN.
GSP:CM> LS
Current configuration of GSP customer LAN interface
MAC address : 00:10:83:27:04:5a
IP address : 15.99.49.129 0x0f633181
Name : feshd5-u
Subnet mask : 255.255.248.0 0xfffff800
Gateway : 15.99.49.254 0x0f6331fe
Status : UP and RUNNING
Current configuration of GSP private LAN interface
MAC address : 00:a0:f0:00:83:b1
IP address : 192.168.2.15 0xc0a8020f
Name : priv-05
Subnet mask : 255.255.255.0 0xffffff00
Gateway : 192.168.2.100 0xc0a80264
Status : UP and RUNNING
GSP:CM>
MP:CM> LS
Current configuration of MP customer LAN interface
MAC address : 00:30:6e:05:19:ac
IP address : 15.99.84.140 (0x0f63548c)
Hostname : redxii-c
Subnet mask : 255.255.255.0 (0xffffff00)
Gateway : 15.99.84.254 (0x0f6354fe)
Status : UP and RUNNING
AutoNegotiate : Enabled
Data Rate : 100 Mb/s
Duplex : Half
Error Count : 0
Last Error : none
MP:CM>
HP Superdome Service Processor LAN Status
HP rp7410 or rp8400 Service Processor LAN Status
Table 3-5 Default Configuration for Service Processor
Customer LAN
(All nPartition Servers)
Customer LAN IP Address 192.168.1.1
Customer LAN Host Name gsp0
Customer LAN Subnet Mask 255.255.255.0
Customer LAN Gateway 192.168.1.1