Technical data

An Overview of nPartition Boot and Reset
Listing nPartition Boot Settings
HP System Partitions Guide: Administration for nPartitions, rev 5.1 178
Listing nPartition Boot Settings
You can list an nPartition’s boot-related settings by using the
nPartition’s BCH interface or by using HP-UX commands.
To list boot settings for nPartitions, use the following procedures:
• Listing nPartition Boot Settings [BCH] on page 178
This procedure (Main menu, Information menu, and Configuration
menu BCH commands) lists an nPartition’s boot settings using the
BCH interface.
• Listing nPartition Boot Settings [HP-UX] on page 181
This procedure (parstatus -V -p# and setboot commands) lists an
nPartition’s boot settings using HP-UX commands.
• Listing nPartition Boot Settings [Partition Manager] on page 183
This procedure (Partition —> Show Partition Details action, General
tab) lists an nPartition’s boot paths from Partition Manager.
Also see the following sections for details on configuring boot settings for
nPartitions.
• Configuring Boot Paths and Boot Actions on page 228
• Configuring Autoboot and Autostart on page 234
• Configuring Automatic System Restart for a nPartition on page 236
• Configuring Fast Boot Settings (Self Tests) for a nPartition on
page 239
• Boot Timer Configuration for an nPartition on page 243
Listing nPartition Boot Settings [BCH]
This procedure (Main menu, Information menu, and Configuration menu
BCH commands) lists an nPartition’s boot settings using the BCH
interface.
Step 1. Login to the server complex’s service processor (GSP or MP), access the
nPartition’s console, and access the BCH Main menu.