Technical data

Booting and Resetting nPartitions
Rebooting or Resetting an nPartition
HP System Partitions Guide: Administration for nPartitions, rev 5.1 215
Rebooting or Resetting an nPartition [Service Processor]
This procedure (service processor Command menu RS command) resets
an nPartition using the service processor.
Step 1. Login to the server complex’s service processor (GSP or MP) and access
the Command menu.
After logging in to the service processor, enter CM to select the Command
menu.
GSP login: Accountname
GSP password: Password
....
GSP> CM
Enter HE to get a list of available commands
GSP:CM>
Step 2. At the Command menu, enter the RS command, specify which nPartition
is to be reset, and confirm whether to reset it.
The Command menu’s RS command resets all active cells in the
nPartition and reboots them past partition rendezvous to BCH or
HP-UX.
Be certain to correctly select which nPartition to be reset.
GSP:CM> RS
This command resets the selected partition.
WARNING: Execution of this command irrecoverably halts all
system
processing and I/O activity and restarts the selected
partition.
# Name
--- ----
0) jules00
1) jules01
Select a partition number: 1
Do you want to reset partition number 1? (Y/[N]) y