Technical data

Booting and Resetting nPartitions

Conﬁguring Boot Paths and Boot Actions

HP System Partitions Guide: Administration for nPartitions, rev 5.1

233

The setboot command supports the following options for setting local

nPartition boot actions:

-b Autoboot setting for the local nPartition:

-b on to automatically boot the PRI path.

-b off to not boot PRI.

-s Autosearch setting for the local nPartition:

-s on to attempt to perform the HAA path’s boot

action when PRI is not booted (either when -b is off,

or when PRI fails to boot when -b is on).

-s off to never attempt to perform the HAA action.

For example, to always stop the local nPartition at BCH when booting,

issue the setboot -b off -s off command.

See Setting Autoboot through Boot Paths and Boot Actions on page 229 or

the setboot (1M) manpage for details.