Technical data

Booting and Resetting nPartitions
Autostart Configuration
HP System Partitions Guide: Administration for nPartitions, rev 5.1 235
NOTE This procedure applies to nPartitions on HP Superdome servers only.
Step 1. Login to the Superdome complex’s service processor (GSP), access the
nPartition’s console, and access the BCH Configuration menu.
From the nPartition console, you can access the nPartition’s BCH
interface. If the nPartition is not at the BCH interface you must either
boot the nPartition or shut down HP-UX to return to the BCH interface.
From the BCH Main menu, enter CO to access the Configuration menu.
Step 2. From the BCH Configuration menu, use the AU command to list or set
Autostart for the nPartition.
Enter AU with no arguments to list the Autostart setting.
Enter AU ON to set Autostart to ON, or AU OFF to set it to OFF.