Technical data

Managing nPartitions
Listing All Configured nPartitions
HP System Partitions Guide: Administration for nPartitions, rev 5.1 252
Listing All Configured nPartitions
You can configure each server complex to have multiple nPartitions,
which are composed of cells in the complex.
You can list all configured nPartitions in the server complex by using the
following procedures:
• Listing All nPartitions [Service Processor] on page 252
This procedure (Command menu, CP command) lists all nPartitions
in a server complex from the complex’s service processor.
• Listing All nPartitions [HP-UX] on page 253
This procedure (parstatus -P command, and parstatus -C for details)
lists information about all nPartitions in a server complex from
HP-UX.
• Listing All nPartitions [Partition Manager] on page 255
This procedure (viewing the left side of Partition Manager primary
window) lists all nPartitions in a server complex using Partition
Manager.
Listing All nPartitions [Service Processor]
This procedure (Command menu, CP command) lists all nPartitions in a
server complex from the complex’s service processor.
Step 1. Login to the service processor for the complex and enter CM to access the
Command menu.
# telnet sdome-s
Trying...
Connected to sdome-s.rsn.hp.com.
Escape character is ’^]’.
Local flow control off
GSP login:
Accountname
GSP password: Password
....
GSP> CM
Enter HE to get a list of available commands
GSP:CM>