Technical data

Managing nPartitions
Listing All Configured nPartitions
HP System Partitions Guide: Administration for nPartitions, rev 5.1 254
The parstatus -P command lists all nPartitions and shows each
nPartition’s number and name, the number of cells assigned to it, the
number of active I/O chassis, and the nPartition’s active core cell.
# parstatus -P
[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 active 2 2 cab0,cell0 jules00
1 active 2 2 cab0,cell4 jules01
#
While an nPartition is booting, the parstatus command cannot
determine the nPartition’s I/O chassis and core cell information. When
this is the case parstatus does not count the I/O chassis and reports a
question mark (?) for the core cell. When the nPartition has completed
booting, parstatus reports all details.
Step 3. To list detailed information about all cells and nPartitions in the server
complex, issue the parstatus -C command.
The parstatus -C command presents more detailed information about
all cells and nPartitions. These details include each cell’s status (active,
inactive), its processor and memory configuration, its I/O chassis
connections (if any), the cell’s use-on-next-boot setting, and nPartition
assignment.
# parstatus -C
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 active core 4/0/4 2.0/ 0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell1 absent - - - - - -
cab0,cell2 active base 4/0/4 2.0/ 0.0 cab0,bay1,chassis3 yes yes 0
cab0,cell3 absent - - - - - -
cab0,cell4 active core 4/0/4 2.0/ 0.0 cab0,bay0,chassis3 yes yes 1
cab0,cell5 absent - - - - - -
cab0,cell6 active base 4/0/4 2.0/ 0.0 cab0,bay1,chassis1 no yes 1
cab0,cell7 absent - - - - - -
#