Technical data

Managing nPartitions

Listing Cell nPartition Assignments

HP System Partitions Guide: Administration for nPartitions, rev 5.1

257

Listing Cell nPartition Assignments

Each cell in an nPartition server complex either is assigned to an

nPartition, or it is unassigned (if it is an available resource).

You can list all cells and their nPartition assignments by using these

procedures:

• Listing Cell nPartition Assignments [Service Processor] on page 257

This procedure (Command menu, CP and DU commands) lists all

cell nPartition assignments and other details from the server

complex’s service processor.

• Listing Cell nPartition Assignments [HP-UX] on page 258

This procedure (parstatus -C) lists all cells in a server complex and

their nPartition assignments.

• Listing Cell nPartition Assignments [Partition Manager] on page 258

This procedure (selecting each nPartition and Available Resources on

the left side of the primary window) lets you view all cell nPartition

assignments in a server complex from Partition Manager.

Listing Cell nPartition Assignments [Service Processor]

This procedure (Command menu, CP and DU commands) lists all cell

nPartition assignments and other details from the server complex’s

service processor.

Step 1. Login to the service processor for the complex and enter CM to access the

Command menu.

Step 2. Enter the CP command to list all conﬁgured nPartitions in the server

complex.

Step 3. Enter the DU command to list additional details (such as available

core I/O) for the cells assigned to the various nPartitions in the server

complex.

On HP Superdome servers, you also can use the service processor

Command menu’s IO command to list cell-to-I/O chassis connections.