Technical data

Managing nPartitions
Creating a New nPartition
HP System Partitions Guide: Administration for nPartitions, rev 5.1 266
When using the parmodify command, you must use the -p # option to
specify the partition number for the nPartition. Use the partition
number that the parcreate command reported in Step 2.
# parmodify -p1 -P "hostname05"
Command succeeded.
# parmodify -p1 -r0/4 -r0/6
Command succeeded.
# parmodify -p1 -b 4/0/1/0/0.9
Command succeeded.
#
When each modification takes place, parmodify reports “Command
succeeded”. Otherwise it reports any problems.
You can specify each configuration option on a separate command line or
can combine all options into a single, longer command line.
For details on the various options for modifying nPartition settings, see
the parmodify (1M) manpage.
Step 4. Use the parstatus -V -p # command to list all details about your newly
created and configured nPartition.
If any configuration details should be modified, use the parmodify
command before you boot the nPartition in the next step.
# parstatus -V -p1
[Partition]
Partition Number : 1
Partition Name : hostname05
Status : inactive
IP address :
Prmary Boot Path : 4/0/1/0/0.9
ALternate Boot Path : 0/0/0/0/0/0/0/0.0.0
HA Alternate Boot Path : 0/0/0/0/0/0/0/0.0.0
PDC Revision : 104.1
IODCH Version : 23664
CPU Speed : 552 MHz
Core Cell : ?
Core Cell Alternate :
0. cab0,cell4
1. cab0,cell6
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Failed/ OK/ cell Next Par
Location Usage Max Failed Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===