Technical data

Managing nPartitions
Unassigning (Removing) Cells from an nPartition
HP System Partitions Guide: Administration for nPartitions, rev 5.1 278
• When a reboot for reconfig is required, the Notes and Warnings tab
also has a check box (“Automatically boot partition”) that—when
selected—enables the nPartition to rendezvous and be active after
the reboot for reconfig.
To cancel all nPartition changes, click the Cancel button in the Notes and
Warnings window and then click Cancel in the Modify Partition window.
To proceed with removing the cell(s) from the nPartition, click OK.
Step 8. When Partition Manager confirms that the “partition has been
successfully modified”, review any additional information and respond as
needed to the dialog box presented.
(The cells were designated to be removed from the nPartition after
completing the previous step, however a reboot may be required.)
• If you have removed only inactive cells from the nPartition, Partition
Manager provides no additional info and you can click OK to
complete the procedure (a reboot is not needed).