Technical data

Managing nPartitions
Setting and Checking Cell Attributes
HP System Partitions Guide: Administration for nPartitions, rev 5.1 292
“Yes” is equivalent to a BCH cell configuration value of ON and “no”
is equivalent to OFF.
• A failure usage setting of “activate” (equivalent to “ri”) indicates that
the cell is set to reactivate with interleave in the event of any failure
during the cell’s self test.
Use the parstatus -C command to list the use-on-next-boot setting for
all cells, which is shown in the “Use On Next Boot” column.
# parstatus -C
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab0,cell0 active core 4/0/4 2.0/ 0.0 cab0,bay0,chassis1 yes yes 0
cab0,cell1 absent - - - - - -
cab0,cell2 active base 4/0/4 2.0/ 0.0 cab0,bay1,chassis3 yes yes 0
cab0,cell3 absent - - - - - -
cab0,cell4 active core 4/0/4 2.0/ 0.0 cab0,bay0,chassis3 yes yes 1
cab0,cell5 absent - - - - - -
cab0,cell6 active base 4/0/4 2.0/ 0.0 cab0,bay1,chassis1 no yes 1
cab0,cell7 absent - - - - - -
#
To list a specific cell’s failure-usage and use-on-next boot settings, issue
the parstatus -V -c# command and specify the cell number.
# parstatus -V -c2
[Cell]
Hardware Location : cab0,cell2
Global Cell Number : 2
Actual Usage : active base
Normal Usage : base
Connected To : cab0,bay1,chassis3
Core Cell Capable : yes
Firmware Revision : 6.0
Failure Usage : activate
Use On Next Boot : yes
Partition Number : 0
....
Memory OK : 2.00 GB
Memory Deconf : 0.00 GB
#