Technical data

Managing nPartitions

Setting and Checking Cell Attributes

HP System Partitions Guide: Administration for nPartitions, rev 5.1

294

Setting Cell Attributes [Partition Manager]

This procedure (Partition —> Modify Partition action, Change Cell Attributes

tab) lists and sets the conﬁgurable cell attributes using Partition

Manager.

Step 1. Run Partition Manager (/opt/parmgr/bin/parmgr) or access it from

SAM or a Web browser.

Step 2. In the Partition Manager primary window, select the nPartition whose

cell attributes you want to change.

Click the nPartition’s name in the list on the left side of the primary

window to select the nPartition.

Step 3. Select the Partition —> Modify Partition action, and click the Change Cell

Attributes

tab.

Step 4. Highlight the cell whose attributes you want to modify, click the Modify

Cell

button, and conﬁgure the cell attributes as desired.

You can modify the settings for multiple cells at once by selecting all

desired cells (press Control while clicking on the cells) before clicking the

Modify Cell button.

Conﬁgure the cell attributes in the window, and then click OK to apply

the modiﬁed attributes or Cancel to cancel any changes.

Step 5. If you have modiﬁed any cell attributes, when you return to the Change

Cell Attributes

tab you can click OK to apply the changes or click Cancel to

cancel them.

Review any Notes and Warnings that Partition Manager presents, then

click OK to proceed or Cancel to cancel the changes.