Technical data

Managing nPartitions
Setting and Checking Cell Attributes
HP System Partitions Guide: Administration for nPartitions, rev 5.1 295
If the cell attribute changes are implemented, Partition Manager
presents a final confirmation that the nPartition was successfully
modified.
Step 6. If you have modified a cell’s attribute settings, you must reboot the
nPartition to which the cell is assigned for the settings to be used.
Rebooting the cell’s nPartition allows the nPartition to use each cell’s
new attribute settings.
• If a cell’s use-on-next-boot setting is changed from “no” (do not use) to
“yes” (use), you must perform a reboot for reconfig of the cell’s
nPartition by using the shutdown -R command.
• Otherwise, if the cell use-on-next-boot settings are only changed from
“yes” to “no” then you can perform a standard reboot using the
shutdown -r command.