Technical data

Managing nPartitions
Setting and Checking nPartition Core Cell Choices
HP System Partitions Guide: Administration for nPartitions, rev 5.1 298
# parstatus -V -p0
[Partition]
Partition Number : 0
Partition Name : jules00
Status : active
IP address : 0.0.0.0
Primary Boot Path : 0/0/2/0/0.13.0
Alternate Boot Path : 0/0/2/0/0.0.0
HA Alternate Boot Path : 0/0/2/0/0.14.0
PDC Revision : 6.0
IODCH Version : 23664
CPU Speed : 552 MHz
Core Cell : cab0,cell0
Core Cell Alternate [1]: cab0,cell0
Core Cell Alternate [2]: cab0,cell2
....
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis1 active yes cab0,cell0 0
cab0,bay1,chassis3 active yes cab0,cell2 0
#
The core cell choice preferences are listed by parstatus as the “Core Cell
Alternate” settings with “1” being the highest priority and “2” through
“4” as the lower priority core cell choices.
The parstatus core cell choice listings (1 through 4) directly correspond
to the BCH core cell choice listings (0 through 3).
Step 2. Modify the nPartition’s core cell choices using the
parmodify -p # -r # ... command.
You can modify the core cell choices for the local nPartition or any remote
nPartition in the server complex.
Use the following command: parmodify -p# -r# -r#...
Specify the partition number (-p#) and the cell ID (-r#) for all cells you
wish to designate as core cell choices.
# parmodify -p0 -r2 -r0
Command succeeded.
#