Technical data

Listing and Managing Server Hardware

Power Status for Hardware Components

HP System Partitions Guide: Administration for nPartitions, rev 5.1

319

Power Status for Hardware Components

You can use system software to check power status for the following

components from remote locations:

• Cabinets

• Bulk Power Supplies and Power Boards

• Cell Boards

• I/O Chassis

• Individual PCI Slots

NOTE Cabinet power details and power supply details are speciﬁc to each

server model. For example, HP Superdome servers and HP rp8400 server

have different power conﬁgurations and requirements.

You can use the following procedures:

• Determining Hardware Power Status [Service Processor] on page 320

This procedure (Command menu, PS command) checks power status

for cabinets, bulk power supplies and power boards, cells, and core

I/O using the service processor.

• Determining Hardware Power Status [HP-UX] on page 322

This procedure (parstatus -B, parstatus -V -b#, frupower -d -C,

frupower -d -I, or rad -q) checks the power status for system hardware

from HP-UX.

• Determining Hardware Power Status [Partition Manager] on

page 324

This procedure (Complex —> Show Complex Details menu) lists

system hardware power status using Partition Manager.