Technical data

Listing and Managing Server Hardware
Listing Cell Processor and Memory Configurations
HP System Partitions Guide: Administration for nPartitions, rev 5.1 335
Listing Cell Processors and Memory [BCH]
This procedure (Information menu, PR and ME commands) lists cell
processor and memory configurations from an nPartition’s BCH
interface.
Using the BCH interface, you can check these details only for the active
cells in the local nPartition.
Step 1. Access the BCH interface for the nPartition to which the cell is assigned,
and access the BCH Information menu.
From the BCH Main menu, enter IN to access the BCH Information
menu. (If you are not at the BCH Main menu, enter MA to go to the Main
menu.)
Step 2. From the BCH Information menu, list the processor or memory status
for all cells by issuing the PR and ME commands.
• Processor status—Use the PR command to report details about all
processors on all active cells in the nPartition.
• Memory status—Use the ME command to report details about all
active cells’ memory configurations.
The ME command summarizes memory (DIMM) details for each
ranks of memory. Each rank is a set of 4 DIMMs.
These BCH commands do not report details for inactive cells.
Information Menu: Enter command > PR
PROCESSOR INFORMATION
Cab/ Processor
Cell Slot CPU Speed HVERSION SVERSION CVERSION State
---- ---- --- -------- -------- -------- -------- -------------
4 0/4 0 552 MHz 0x5c70 0x0491 0x0301 Active
1 552 MHz 0x5c70 0x0491 0x0301 Idle
2 552 MHz 0x5c70 0x0491 0x0301 Idle
3 552 MHz 0x5c70 0x0491 0x0301 Idle
6 0/6 0 552 MHz 0x5c70 0x0491 0x0301 Idle
1 552 MHz 0x5c70 0x0491 0x0301 Idle
2 552 MHz 0x5c70 0x0491 0x0301 Idle
3 552 MHz 0x5c70 0x0491 0x0301 Idle
Information Menu: Enter command > ME