Technical data

Virtual Partitions (vPars) Management on nPartitions

Conﬁguring vPar Autoboot

HP System Partitions Guide: Administration for nPartitions, rev 5.1

501

Firmware Version 35.3

Duplex Console IO Dependent Code (IODC) revision 1

--------------------------------------------------------------------------

....

Primary Boot Path: 0/0/1/0/1.5

Boot Actions: Boot from this path.

If unsuccessful, go to BCH.

HA Alternate Boot Path: 0/0/1/0/1.6

Boot Actions: Go to BCH.

Alternate Boot Path: 0/0/1/0/1.4

Boot Actions: Go to BCH.

Console Path: 0/0/0/0/0.0

Attempting to boot using the primary path.

-------------------------------------------------------------

To discontinue, press any key within 10 seconds.

10 seconds expired.

Proceeding...

Initializing boot Device.

Boot IO Dependent Code (IODC) Revision 0

Boot Path Initialized.

HARD Booted.

ISL Revision A.00.43 Apr 12, 2000

ISL booting hpux boot /stand/vpmon -a

Boot

: disk(0/0/1/0/1.5.0.0.0.0.0;0)/stand/vpmon

585728 + 164600 + 16896360 start 0x23000

[MON] Booting Mesh...

MON> [MON] Console client set to Mesh

[MON] Mesh loaded