Technical data

HP System Partitions Guide: Administration for nPartitions, rev 5.1 518
Booting an nPartition to the ISL Prompt 207
Booting and Resetting nPartitions 197
Booting from an HP-UX Install Source [BCH] 211
Booting HP-UX in Single-User or LVM-Maintenance Mode
[BCH, ISL, and hpux] 209
Booting HP-UX on an nPartition [BCH] 204
Booting HP-UX on vPars 485
Boot-Is-Blocked (BIB) 167
Cabinet Number LCDs 327
Cell IDs in Global Cell Number Format 87
Cell IDs in Hardware Location Format 88
Cell LEDs 326
Cell Properties 61
Cells 47
Chart of Supported HP rp7410 nPartition Configurations 117
Chart of Supported HP rp8400 nPartition Configurations 118
Charts of Supported HP Superdome nPartition Configurations 119
Chassis Code Log Viewing 156
Checking Blower and Fan Status 347
Checking Fan Status [HP-UX] 348
Checking Fan Status [Partition Manager] 349
Checking Fan Status [Service Processor] 347
Checking for Memory DIMM Failures 362
Checking for Power Supply Failures 359
Checking for Processor Failures 365
Checking if vPars are Running on an nPartition 506
Checking Memory Status [HP-UX] 362
Checking Memory Status [Partition Manager] 364
Checking Power Supply Status [HP-UX] 359
Checking Power Supply Status [Partition Manager] 361
Checking Power Supply Status [Service Processor] 359
Checking Processor Status [HP-UX] 365
Checking Processor Status [Partition Manager] 366
Checklist and Guidelines for Booting nPartitions 184
Checklist for Preparing for PCI Card OLAR 384
Command Menu 128
Commands Commonly Used at the Service Processor 141
Commonly Used rad Commands
for nPartition I/O Details and Card Add/Replace Tasks 372
Complex Health Analysis of a Server 350
Complex Profile Locks 69
Complex Profiles 68
Configurable Boot Settings 174
Configuration Guidelines for Fault-Tolerant Virtual Partitions 458
Configuration Guidelines for HP Superdome nPartitions 115
Configuration Planning Table for a Virtual Partition (vPar) 469