Technical data

nPartition System Overviews
nPartition Service Processor (GSP or MP) Hardware
HP System Partitions Guide: Administration for nPartitions, rev 5.1 57
Service Processor for HP rp7410
On HP rp7410 servers, service processor functionality is provided in the
core I/O card, shown in Figure 1-12. The rp7410 core I/O card’s customer
LAN port, which permits remote telnet access to the service processor, is
labeled “MP LAN”. The “MP Serial” port is single DB25 serial port from
which three DB9 serial connectors are available (a DB25-to-3xDB9
dongle must be connected). A direct RS-232 serial connection to the
service processor is available through the DB9 connector labeled
“Console”. Remote modem access to the service processor can be provided
through the DB9 connector labeled “Remote”.
Figure 1-12 HP rp7410 Service Processor LAN and Serial Ports