Technical data

nPartition System Overviews
Using HP-UX nPartition Configuration Commands
HP System Partitions Guide: Administration for nPartitions, rev 5.1 86
Table 1-5 describes the nPartition configuration commands and lists
sections where you can find each command’s syntax and details.
Table 1-5 HP-UX nPartition Configuration Commands
Command Description
parcreate Create a new nPartition; root permission is required.
See parcreate Command on page 93.
parmodify Modify an existing nPartition; root permission is required.
See parmodify Command on page 95.
parremove Remove an existing nPartition; root permission is required.
See parremove Command on page 98.
parstatus Display nPartition information and hardware details for a server
complex.
See parstatus Command on page 99.
parunlock Unlock Complex Profile data (use this command with caution); root
permission is required.
See parunlock Command on page 101.
fruled Blink the attention indicators (LEDs) or turn them off. This command
can control these indicators for cells, I/O chassis, and cabinet numbers.
See fruled Command on page 102.
frupower Display status or turn power on or off for cells and I/O chassis; root
permission is required.
See frupower Command on page 104.