Technical data

nPartition System Overviews
parmodify Command
HP System Partitions Guide: Administration for nPartitions, rev 5.1 96
n Do not participate in reboot.
• The only valid failure_usage value is:
ri Reactivate with interleave
(the default).
-m cell :[ cell_type ]:[ use_on_next_boot ]:[ failure_usage ]
Modify attributes of a cell already assigned the
nPartition.
For details on cell_type , use_on_next_boot , and
failure_usage see the -a option’s descriptions
(above).
-I IPaddress
Specifies the IP address that should be used by
management tools (like SAM) to address this
nPartition.
-r cell
Specifies the core cell and core alternate cells. One to
four core cell choices can be specified.
-d cell
Remove the specified cell from the nPartition.
-b path
Specifies the primary (PRI) boot path.
-t path
Specifies the alternate (ALT) boot path.
-s path
Specifies the secondary (HAA) boot path.
-P PartitionName
Specifies the name of the nPartition.
-B Specifies whether to boot the nPartition. The default is
not to boot.
When you modify an inactive nPartition and specify the
-B option, the nPartition is booted (and becomes active)
immediately after it is modified.