User's Manual

C-14
Safety and EMC Regulatory Statements
EMC Regulatory Statements
Safety and EMC Regulatory
Statements
* A point-to-point antenna, accompanied with a pigtail cable, a 10 ft extension cable (model
LMR-400), and a lightning arrester, which should be connected.
CAUTION ■ When using antennas outdoors, a lightning arrestor is required for light-
ning protection. Consider placing the lightning arrestor immediately
before the antenna cable enters the building. HP offers a lightning arrestor
as an accessory; it is orderable under HP product number J8996A.
■ All HP ProCurve devices are designed to be compliant with the rules and
regulations in locations they are sold and will be labeled as required. Any
changes or modifications to HP ProCurve Equipment, not expressly
approved by HP, could void the user’s authority to operate this device.
Use only antennas approved for use with this device. Unauthorized
antennas, modifications, or attachments could cause damage and may
violate local radio regulations in your region.
■ When using external antennas, users must ensure that the combined
transmit power and antenna gain does not violate the maximum Equiva-
lent Isotropic Radiated Power (EIRP) for your region. Information on
configuring this device to operate in a compliant manner can be found in
the Management and Configuration Guide.
J8999A
Module 1_bg
802.11b: 22
802.11g: 18.5
2.4-2.5
4.9-5.99
Directional 6.9/7.7
Module 2_abg
802.11a: 17
802.11b: 22
802.11g: 18.5
J8998A Module 2_abg 802.11a: 17 5.15-5.875 Omni 6.3
J9000A Module 2_abg 802.11a: 17 5.15-5.875 Directional 13.3
HP Product
Number
Power (dBm) Frequency
Range (GHz)
Antenna Type Actual
Gain (dBi)