User's Manual

Index – 3
Index
L
LAN LED 1-4
behaviors 1-4
LEDs
behavior during self test 2-6
blinking definition 1-4
checking during troubleshooting 5-6
descriptions of 1-4
error indications 5-3
LAN 1-4
location on access point 1-3
on access point 1-4
Power 1-4
behavior during self test 2-6
Self Test
behavior during self test 2-6
Wireless 1-4
length limitations
10/100Base-TX connections 2-4
location for the access point, considerations 2-4,
4-3
lock
location on access point 1-6
M
MDI-X to MDI network cable B-3
MDI-X to MDI-X network cable B-4
mounting the access point
on a horizontal surface 2-11
on a wall 2-7, 2-9
precautions 2-7
N
network cables
10/100Base-TX connections 2-4
required types 2-4
twisted-pair connector pin-outs B-2
twisted-pair, wiring rules B-2
network devices
connecting to the access point 2-12
network ports
connecting to 2-12
location on access point 1-6
standards compliance A-2
types of 2-4, 4-2
non-standard network cables, effects 5-2
O
out-of-band console access 3-8
P
parts, included with the access point 2-1
passwords
deleting with the Clear button 3-7
if you lose the password 3-7
physical specifications, access point A-1
Ping test 5-7
pin-outs
twisted-pair cables B-2
PoE power connector
location on back of access point 1-5
port LEDs
normal operation 2-6
ports
10/100Base-TX, location on access point 1-5
connecting to 2-12
console 2-13
network connections 2-12
power connector 1-6
Power LED 1-4
behavior during self test 2-6
behaviors 1-4
location on access point 1-3
power source
connecting the access point to 2-11
precautions
mounting the access point 2-3
power requirements 2-3
preparing the installation site 2-4
Proactive Network tools
diagnostics with 5-5
R
recycle statements D-1
regulatory statements C-9
Reset button
description 1-7
location on access point 1-7
resetting the access point
factory default reset 5-8
location of Reset button 1-7
troubleshooting procedure 5-6