User's Manual

6
1. Match the model number on the purchase order with the model numbers in the packing list and on the case
of the device shipped.
2. Verify that the contents of the box include the intended ProCurve Radio Port 230 or 210 and mounting
hardware:
3. Review site survey and network analysis reports to determine the location and mounting position for the
ProCurve Radio Port 230 and 210.
4. Connect a CAT-5 cable to a compatible 802.3af power source and run the cable to the installation site. Ensure
that there is sufficient slack on the cable to perform the installation steps.
Wall Mount
Radio Port Item Notes
230 J9006A 802.11a & 802.11b/g integrated antenna configuration.
210 J9004A 802.11b/g integrated antenna configuration.
Wall Mount Slot
T-Bar Suspension Clips
See Detail Below
T-Bar Retaining Clip
Safety Wire Tie Point
RJ-45 Port
Lock Port