User Manual

Index – 1
Index
Index
Numerics
10/100Base-TX
connections, length limitations … 2-8
ports, cables used with … 2-8
10/100Base-TX port
location on access point … 1-6
A
access point
connecting to a power source … 2-12
description … 1-1
electrical specifications … A-1
emissions specifications … A-2
environmental specifications … A-1
features … 1-8
included parts … 1-3
LED descriptions … 1-5
physical specifications … A-1
top panel description … 1-4
access point operation
verifying after installation … 2-10
antennas
location on access point … 1-7
auto MDI/MDI-X operation … B-3
B
back of access point
10/100Base-TX port … 1-6
description … 1-6
network port … 1-6
power connector … 1-6
Reset button … 1-7
basic troubleshooting tips … 6-1
blinking LEDs
error indications … 6-3
buttons
Reset button … 1-7
C
cables
10/100Base-TX connections … 2-8
connecting cables to the access point
port … 2-13
effects of non-standard cables … 6-2
infrastructure requirements … 2-8
length limitations … 2-8
required types … 2-8
cables, twisted pair
access point-to-computer connection … B-3
access point-to-switch or hub connection … B-4
category 5 … B-2
cross-over cable pin-out … B-4
MDI-X to MDI connections … B-3
MDI-X to MDI-X connections … B-4
pin-outs … B-3
straight-through cable pin-out … B-3
cables, twisted-pair
wiring rules … B-2
cables, twisted-pair connector pin-outs … B-2
cabling infrastructure … 2-8
command line interface
key command descriptions … 3-5
configuration
restoring factory defaults … 6-7
connecting the access point to a power
source … 2-12
connector specifications … A-2
cross-over cable
pin-out … B-4
D
DC power connector
location on back of access point … 1-6
description
access point … 1-1
back of access point … 1-6
LEDs … 1-5
top of access point … 1-4
DHCP
for in-band access … 2-13