User Manual

2 – Index
Index
diagnostic tests … 6-6
checking the LEDs … 6-6
end-to-end connectivity … 6-7
testing the access point only … 6-6
testing twisted-pair cabling … 6-6
E
electrical specifications, access point … A-1
EMC regulatory statements … C-9
emissions specifications, access point … A-2
environmental specifications, access point … A-1
F
factory default configuration, restoring … 6-7
features
access point … 1-8
full-duplex fixed configuration
effects on network connections … 6-1
I
included parts … 1-3
installation
connecting the access point to a power
source … 2-12
location considerations … 2-8
network cable requirements … 2-8
precautions … 2-2
site preparation … 2-8
summary of steps … 2-3
L
LAN LED … 1-5
behaviors … 1-5
LEDs
behavior during system initialization … 2-11
checking during troubleshooting … 6-6
descriptions of … 1-5
error indications … 6-3
LAN … 1-5
location on access point … 1-4
on access point … 1-5
Power … 1-5
behavior during system initialization … 2-11
length limitations
10/100Base-TX connections … 2-8
location for the access point, considerations … 2-8
M
MDI-X to MDI network cable … B-3
MDI-X to MDI-X network cable … B-4
N
network cables
10/100Base-TX connections … 2-8
required types … 2-8
twisted-pair connector pin-outs … B-2
twisted-pair, wiring rules … B-2
network devices
connecting to the access point … 2-13
network ports
connecting to … 2-13
location on access point … 1-6
standards compliance … A-2
types of … 2-8
non-standard network cables, effects … 6-2
O
open source licenses
BSD … C-26
ClearSilver … C-11
CMU … C-27
Dropbear … C-13
GPL … C-10
GPL2 … C-4
Intel … C-24
LGPL … C-15
MIT … C-25
OpenSSL … C-28
P
parts, included with the access point … 1-3
physical specifications, access point … A-1
Ping test … 6-7
pin-outs
twisted-pair cables … B-2
PoE power connector
location on back of access point … 1-6