User Manual

Index – 3
Index
port LEDs
normal operation … 2-11
ports
10/100Base-TX, location on access point … 1-6
connecting to … 2-13
network connections … 2-13
power connector … 1-6
Power LED … 1-5
behavior during system initialization … 2-11
behaviors … 1-5
location on access point … 1-4
power source
connecting the access point to … 2-12
precautionsprecautions
power requirements … 2-2
preparing the installation site … 2-8
R
recycle statements … D-1
regulatory statements … C-9
Reset button
description … 1-7
location on access point … 1-7
resetting the access point
factory default reset … 6-7
location of Reset button … 1-7
troubleshooting procedure … 6-6
S
safety and regulatory statements … C-1
safety specifications … A-2
sides of access point
antennas … 1-7
specifications
connectors … A-2
electrical … A-1
emissions … A-2
environmental … A-1
physical … A-1
safety … A-2
wireless … A-3
straight-through cable
pin-out … B-3
summary
of access point installation … 2-3
of cables used with the access point … 2-8
system initialization
LED behavior during … 2-11
Power LED behavior … 2-11
T
testing
access point operation … 6-6
access point-to-device communications … 6-7
checking the LEDs … 6-6
diagnostic tests … 6-6
end-to-end communications … 6-7
Ping test … 6-7
twisted-pair cabling … 6-6
tips for troubleshooting … 6-1
top of access point … 1-4
description … 1-4
LEDs … 1-5
topologies
effects of improper topology … 6-2
troubleshooting … 6-1
basic tips … 6-1
checking the LEDs … 6-6
common network problems … 6-1
connecting to fixed full-duplex devices … 6-1
diagnostic tests … 6-6
effects of improper topology … 6-2
effects of non-standard cables … 6-2
Ping test … 6-7
restoring factory default configuration … 6-7
testing connections to other devices … 6-7
testing end-to-end communications … 6-7
testing the access point … 6-6
testing the twisted-pair cables … 6-6
twisted-pair cable
access point-to-computer connection … B-3
access point-to-switch or hub connection … B-4
cross-over cable pin-out … B-4
pin-outs … B-2–B-3
straight-through cable pin-out … B-3
testing … 6-6
W
warranty … 1-ii
wireless specifications … A-3
wiring rules for twisted-pair cables … B-2